久久精品91久久香蕉国产_刚国产欧美精品一区_xxx极品美女另类_免费海量影片在线观看_日韩免费码中文在线观看_国产成人久久精品麻豆_中文在线资源天堂_在线精品日韩亚洲欧美视频

400-6388-667Food/Pharmaceutical/Cosmetic/Mechanical domain experts

homeSterilization System product details

Ultra - high temperature instantaneous sterilization machine UHT sterilizer beve

Release date:[2017-03-11]     Click rate:

This equipment is suitable for instantaneous sterilization of liquid materials such as fresh milk, fruit juice, beverage, stick ice, ice cream paste, soy sauce, soy milk, condensed milk, alcohol and so on, and can also be used for sterilization of fluid material. The equipment of the feed and discharge are used three-way cock, the flow can be adjusted according to need to use reliable.

overview
parameter

This equipment is suitable for instantaneous sterilization of liquid materials such as fresh milk, fruit juice, beverage, stick ice, ice cream paste, soy sauce, soy milk, condensed milk, alcohol and so on, and can also be used for sterilization of fluid material. The equipment of the feed and discharge are used three-way cock, the flow can be adjusted according to need to use reliable.

How the equipment works:


Features:

1, continuous production, sterilization time is very short.

2, due to short heating time to obtain quality products.

3, due to the use of ultra-high temperature sterilization, so sterilization effect is particularly good.

4, with the centrifugal pump or high pressure homogenizer in series, a wide range of applications, suitable for high viscosity material sterilization.

5, because the design of the use of hot and cold heat exchanger with waste heat utilization of economic effects, so the steam consumption is small.

Maintenance and troubleshooting:

1, regularly check the trap to prevent condensation of steam condensate blocked.

2, often check the safety valve, pressure gauge and thermometer is out of order.

3, if found to be a serious leak in the pump should be timely maintenance, if necessary, swap the end of the shaft seal.

4, such as the use of homogeneous machine at the same time, optional 3WR-1.5-type high-pressure pump, and according to the instructions required maintenance.

5. If the equipment is to be used in a frozen area during the winter deactivation, the water in the pipe should be drained or filled with 1% lye.

6, the pipe joints and cocks should always check whether the tight, not to leak or mixed into the air, because the material into the air will accelerate the formation of pipe wall fouling.

7, when the equipment is not used, the steam valve should be opened for future use.

8, the feed pump motor bearings should be cleaned each year, and the replacement of lubricants, the amount can not be too much, as long as half of the bearing shell filled on the line.

9, the feed pump is not allowed in the absence of liquid time and space.

10, the sudden elimination of power failure.


Contact us

Learn more about our detailed information, please contact
400-6388-667

Or leave a message to us

轮台县| 遵义市| 博罗县| 余江县| 定兴县| 竹北市| 通海县| 南宫市| 廊坊市| 福海县| 渭南市| 远安县| 阳高县| 南木林县| 舒城县| 石屏县| 通化市| 津南区| 湟源县| 余干县| 宜宾市| 英山县| 出国| 嘉善县| 贞丰县| 揭东县| 海晏县| 合江县| 潮安县| 财经| 靖江市| 乐平市| 句容市| 屏山县| 江永县| 汝南县| 搜索| 巴林右旗| 垣曲县| 正宁县| 合川市|